Discussion:
[Bacula-users] PowerVault 124T Bacula Auto cleaning
lalecherej
2012-05-30 09:41:39 UTC
Permalink
Hi all,

I have a Dell PowerVault 124T. On my PV-124T, I enabled auto cleaning (With Auto Clean enabled the loader will automatically load the cleaning tape when the drive requests cleaning).

But, It's bacula or PV-124T which sends the drive requests cleaning ?

How to know if the auto clean is functional and if my drive is clean ?

Thanks.

Jérémy.

+----------------------------------------------------------------------
|This was sent by ***@brainsonic.com via Backup Central.
|Forward SPAM to ***@backupcentral.com.
+----------------------------------------------------------------------
Bertrand, Guy
2012-05-30 12:51:54 UTC
Permalink
Jérémy,

You can put your Dell 124T on your network and then HTTP to it. You will get a menu that will let you do many operations directly with the tape drive. Or use the front panel of your tape drive. Following the Dell owner's manual for instructions. Cleaning tapes is not a Bacula function (correct me anybody...).

Once your cleaning is done, do not use the front panel or HTTP menu for anything else, especially if you have an autoloader. (Again somebody correct me if I am wrong) , but Bacula keeps information about which tape is in what slot, and if you use the front panel or the HTTP menu to move tapes around, that information is not getting back to Bacula... If a tape is in the wrong place, Bacula should read the header info on the tape, decide that it is not the right one, and prompt you to find it ( I think...I'm still learning Bacula)

Regards,

Guy

-----Message d'origine-----
De : lalecherej [mailto:bacula-***@backupcentral.com]
Envoyé : 30 mai 2012 05:42
À : bacula-***@lists.sourceforge.net
Objet : [Bacula-users] PowerVault 124T Bacula Auto cleaning

Hi all,

I have a Dell PowerVault 124T. On my PV-124T, I enabled auto cleaning (With Auto Clean enabled the loader will automatically load the cleaning tape when the drive requests cleaning).

But, It's bacula or PV-124T which sends the drive requests cleaning ?

How to know if the auto clean is functional and if my drive is clean ?

Thanks.

Jérémy.

+----------------------------------------------------------------------
|This was sent by ***@brainsonic.com via Backup Central.
|Forward SPAM to ***@backupcentral.com.
+----------------------------------------------------------------------




________________________________

This E-mail and any of its attachments may contain Company proprietary information, which is privileged, confidential, or subject to copyright belonging to the Company. This E-mail is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient of this E-mail, you are hereby notified that any dissemination, distribution, copying, or action taken in relation to the contents of and attachments to this E-mail is strictly prohibited and may be unlawful. If you have received this E-mail in error, please notify the sender immediately and permanently delete the original and any copy of this E-mail and any printout.
Radosław Korzeniewski
2012-05-30 14:09:14 UTC
Permalink
Hello,
Post by Bertrand, Guy
If a tape is in the wrong place, Bacula should read the header info on the
tape, decide that it is not the right one, and prompt you to find it ( I
think...I'm still learning Bacula)
If you messed up a tapes slots location (manual tape movement) that you
have to tell Bacula about that.
You should use an "update slots" console command.

best regards
--
Radosław Korzeniewski
***@korzeniewski.net
Loading...